This construction plan provides you with every information to construct the 12 cylinder V-engine by yourself. There are detailed construction plans with specifications and parts list available for this engine. For further information see below.
Technical data of the engine
|Weight approx.||4800 g|
|Revolutions approx.||950 - 4500 1/Min.|
|Valve diameter||8,5 mm|
|Valve lap||20 degrees KW|
|Outer diameter approx.||-|
|Width approx.||145 mm|
|Height approx.||145 mm|
|Length approx.||295 mm|
|Propeller size up to approx.||24x10 inch|
Videos of the engine
Depending on the speed of your internet connection it can take a few moments until the videos are available.
Videoclip No. 1 - Test-run video
Videoclip No. 2 - Test-run video
The construction plan
Order the instructions to construct your own 12 cylinder V-engine!
The construction plan consists of six format DIN A3 sheets with a presentation of the individual parts as well as two sheets in the same format with the views i.e. cross-section of the complete engines. In addition there is are several pages of specifications containing part lists of all parts. There are also suppliers addresses listed for e.g. ball bearings, cogwheels or valve springs.
The plan is very precise and shows all parts in a comprehensible form.
Many feedback including photos of engines constructed by customers confirm that they have been successfully reproduced.
However, a lathe and milling machine is necessary for the manufacture.
Extracts from the plans
All construction plans are protected by copyright. Copyright © 2004 (2005) by MARTIN OHRNDORF. The plans may not be copied or multiplied, or made available to third parties. The plans may not be stored on data carriers, knowingly or unknowingly. Parts or complete engines constructed using the plans are solely for private use. They may not be sold or used for commercial purposes. Legal action will be taken against anyone who violates these terms.